Technical Specification:
(1200mm X 300mm)
Manufacturers Specification for Clip-in 1200 * 300 mm Concealed Plain Panel False Ceiling System.
Panel Details (Aluminium)
Panels shall be fabricated from 0.71 mm thick (TCT) aluminium alloy. Panel shall be square edged. Panel size shall be 1200 mm * 300 mm and shall be powder coated on external surface only. Edge profile shall be 18 mm * 20 mm fabricated from G.I. Sheet.
Panel Details (Galvanized Steel)
Panels shall be fabricated from 0.50mm thick (TCT) G.I. sheet. Panel shall be square edged. Panel size shall be 1200 mm * 300 mm and shall be powder coated on external surface only. The edge profile shall be 18 mm * 20 mm fabricated from G.I. Sheet.
Perforation Details
- Tile shall have 1.6 mm dia at 3 mm Centre to Centre in diagonally.
- Tile shall have 2 mm dia at 7 mm Centre to Centre in diagonally.
- Tile shall have 2.5 mm dia at 5 mm Centre to Centre in square pattern.
- Tile shall have 3 mm dia at 7 mm Centre to Centre in diagonally.
- Tile shall have 6 mm Square holes at 12 mm Centre to Centre in Square Pattern.
Installation Details
GI rod, top and bottom portion of rod shall be rounded, Top end shall be screwed to slab and bottom shall be nut bolted to hold on hanger. Sil Carrier shall be fixed into hold on hanger with level adjusting spring steel clip to maintain the desired level of False Ceiling. Suspenders shall be at max. 1200 mm and the distance between two carriers will be 1200 mm center to center. Panel shall be snapped into carrier. Pressure clip shall be provided along the length to hold the panels. Edge profile shall be fixed on the perimeter of walls and columns.
